LEd lighting that is powered by usb port in your pc or laptop.
It s usefull when you need light enough to light up your working space near your pc.
Materials:
1-USB cable
* diagram below for more information about the pins
1-White LED (any color will do depending on your preference)
*see LED basic info for more info about LED properties
1-150 ohms 0.25W resistor
* see Resistor calculator for resistor color code
USB pinouts |
USB pin color designation |
USB LED light schematic |
The USB port in you computer or laptop provides a regulated 5V DC between the USB pin 1(VCC) and USB pin 4 (Ground). Connect the 150 ohms resistor and white LED using the designated pins as shown in the schematic above. If you are planning to change the values of resistor and color of LED just keep in mind that the current must be limited up to 20mA only. See the LED-Resistor calculator for more LED and resistor combination of your choice.
Bike Led Light can be charged easily. There are different to charge it. It can be moved easily according to situation.
ReplyDeleteI am thoroughly convinced in this said post. I am currently searching for ways in which I could enhance my knowledge in this said topic you have posted here. It does help me a lot knowing that you have shared this information here freely.
ReplyDeleteThanks for taking the time to discuss this, I feel strongly about it and love learning more on this topic. If possible, as
ReplyDelete